Re-Building My Studio

 

The Inside
 

first...the ceiling...

at the bottom of the page you will find a scan of the construction drawing i did of the ceiling with a short explanation

new pictures are added to the top of the page

march 5

I finished the ceiling, well at least the first layer of it...

- -

march 4

last section of the ceiling

march 3

preparations for isolating the small space, where the wall used to be.

- - - - - -

march 2

finished the front

now there's only one section in the back that needs to be done

-

march 1

front back -

sealing off the "leaks" between the (new) ceiling and the wall

- - -

februari 28

front back -

detail of the ceiling, you can see the different layers

1 - particle board 18 mm

2 - 3 x 5 cm of rockwool

february 25

today i did 2 small rows of rockwool (lazy sunday...)
- - - - -

february 24

got help from JayCee Corp !

today we finished the particle boards in the smaller part of the ceiling (behind the "office")

- - looking for something ?

- -
-
february 21
- -
february 20
- -

february 19

3 layers of rockwool for the ceiling (15 cm total)
-
february 14
-

february 12 - 13

large particle boards (1.25 m x 2.50 m) were cut into smaller pieces, varying from 39 to 51 cm

for the ceiling we used 56 pieces of 1.25 m in length (but varying in width)

we used approx 300 meters on laths for the ceiling (marked # 4 on the drawing at the bottom)
- - - -
- -

 

february 6 - 8

on the picture with the arrows (see below feb 4), i first start with the laths on the side of the beams

these are used to maintain the air space between the flat roof and the particle board

JayCeeCorp! assisted me...
-
- - -
february 4
got some help from my dad cutting the laths -
-
-

drawing of the ceiling

1- bitumen roofing felt

2- flat roof (wood)

3- beam (wood) 175 mm

4- lath (wood) 20 mm

5- particle board 18 mm

6- air space 20 mm

7- rubber tile, 25 mm

8- rockwool, 2 layers, total 150-180 mm

9- drywall (or plasterboard or sheetrock), 2 layers, each 125 mm