april 4

sealed off the last "leaks" at the bottom of the drywall with concrete

- - -

today, Loek, James and me will start with the first layer for the ceiling;

particle board

we've got 12 boards of 125 x 250 x 12 mm

see the pictures on the "CEILING" page

march 20

all walls, except left and right from the door, are now filled with rockwool

the upper part, close to the ceiling, will be finished after the particle board is attached to the ceiling

march 18

right, back to the initial plan

more rockwool !

- -

in the coming days i will put one layer (5 cm) of rockwool between the (original) walls and the drywall

i just need to unscrew the upper screws and lower the rockwool in like the game 4-in-a-row...

today we roughly finished the walls.

that means, drywall on all walls in rows of 260 x 60 cm

the total length of the walls is approx. 270 cm so the top row will be put on later, after the ceiling is ready.

this way the layers of the wall and ceiling cross each other, thus covering any unwanted openings between the boards.

details

- -

let's go...

-

here they are !

the gyproc moisture resistant drywall

ok, they're not green as intended but the specifications are the same.

(+ 7 particle boards)

- -

march 14

waiting for the arrival of the greenboard (drywall)

62 plates of 260 x 60 cm (thickness 12,5 mm)

and 12 particle boards of 250 x 125 cm (12,5 mm)

they are scheduled to be delivered this afternoon and should cover the walls and the ceiling

march 5 - march 13

all is ready now for the greenboard (drywall)

the "raster" on the walls (don't know a better english word for it) are attached 60 cm apart for the greenboard (60 cm wide)

- - -

march 12

the aid troops

Loek came in to help out !

march 10 - 11 - 12

got the flu @X&*$^&%

that means; no work :-(

(not much to rock then...)

march 5 - 9

i decided to go for the rubber tiles

so i cut them up in small squares

-

also had a meeting with Loek on the wednesday 7th

we discussed the walls, the ceiling, ventilation, the floating chamber and all the materials.

Loek is gonna help out with his skills so it's time to rock !

-

not much work done otherwise

had other stuff to do like preparing 2 new releases

- - -

ok, i tried something else

it was actually my first idea so i gave it a try again

i cut up a large rubber tile and use this as isolation between the gipsum board and the walls (and also the ceiling, see pictures)

the wall -

-

and the ceiling -

-

march 3

the next step.

*experimenting with materials for the walls*

a new wall / layer of greenboard (gipsum board) is planned.

it will be attached to the walls on laths.

now to prevent resonation, rubber material will be put inbetween the greenboard and the laths.

the bottom of the greenboard, placed on the concrete floor, should be isolated with some kind of rubber material to prevent resonation.

below an idea that i am working on

- -